Twin shaft concrete mixer performance characteristics and operating procedures

wendy2015

Concrete twin-shaft  mixer ismainly used for mixing of various powder materials. We can produce all kinds ofpowder mixing materials. Its aggregate may be wet fly ash, calcium carbidesludge, gypsum, gravel, slag and so on. It is mainly used in the past ofsupporting host a variety of standard bricks, sand-lime brick production line,one of the important equipment is autoclaved fly ash bricks, sand-lime brickproduction process of. Now a major project in the concrete mixing station alsoput it as supporting the host.

Structure Features
Concrete twin-shaft compulsory mixer is mainly composed of chassis, screw shaftassembly, drives, piping, cover, chain cover and other components.

[url=]operation[/url] [url=]specification[/url]

1
Check before use
Transmission to press the switch, and then close the knife, to check whetherthe operation is flexible. Vibrators, roller operation, dial feed stick isfunctioning properly. Rope is wound on the reel; lift the refuse station, etc.are normal. If found fault, notify electromechanical team process. After thedeal, before use.
2
Once the material can not be too much, according to the ratio of materials, payattention to water-cement ratio. Stir once mixing time of not less than oneminute, normal marinated concrete, it should be very thick porridge-like.
3
Fixed hand boot, drivers should be familiar with the role of the principle ofeach operating system, found fault immediately stop inspection.

4
Most appliances should love, cables to protect against damage.
5
Mixers should level up, people can not stand under the hopper mixer, to preventthe next funnel trounced wounding.
6
Temporary stop rail, it should regularly (every twenty minutes), start themixer, to prevent solidification of concrete or concrete poured into the drum,drum rinse.
7
After filling Tongjiao End stop, should be promptly mortar and machine outerdrum water rinse clean. Next class clean up once the feed hopper to feed apredetermined position when material falls political decentralization, andcoated with a layer of oil on the outside until the next use.